A residential grading plan shows how water will flow across your property, where elevations change, and which drainage features (like swales or slopes) protect your home and neighboring lots. Having a clear grading plan prevents basement flooding, protects foundations, and keeps you compliant with municipal standards.

You’ll learn what a grading plan contains, how it ties into site servicing and permits, and what steps professionals take to certify as-built grades. Expect practical guidance on reviewing plans, avoiding common drainage mistakes, and meeting local compliance so your project moves forward without costly delays.

Understanding Residential Grading Plans

A residential grading plan shows finished elevations, slopes, drainage paths, and control measures for a single lot. It defines how water moves away from structures, where swales and retaining walls sit, and the finished top-of-slab and yard elevations you must meet.

What Is a Residential Grading Plan?

A residential grading plan is a technical drawing prepared by an engineer or licensed designer that depicts finished ground elevations and surface flow patterns for a house lot.
You’ll see contour lines, spot elevations at corners and critical points, and proposed soil cut-and-fill limits.

Typical elements include finished floor elevation (FFE), top-of-foundation elevations, and slope gradients expressed as ratios or percentages.
The plan may reference a site datum and show adjacent property grades to ensure no unintended drainage onto neighboring lots.
Inspectors use this document to confirm the lot is built to approved elevations and drainage directions.

Purpose and Importance

The primary purpose is to direct stormwater away from your home and prevent foundation or yard saturation.
Proper grading reduces hydrostatic pressure on foundation walls, minimizes erosion, and protects sidewalks, driveways, and adjacent properties.

Municipalities often require a grading plan for new subdivisions or when lot changes affect runoff patterns.
You’ll need it for permit approval, and inspectors will verify compliance during construction.
A clear plan also guides earthwork contractors and helps estimate cut/fill volumes and erosion-control measures.

Key Elements Included

A grading plan includes finished contours, spot elevations, and slope callouts showing percent or ratio (e.g., 2% or 1:50).
It lists Finished Floor Elevation (FFE), top-of-slab elevation, and roof drainage flow if relevant.

Drainage features such as swales, berms, catch basins, and direction arrows appear on the plan.
Erosion and sediment control notes, retaining wall locations and heights, and material specifications are common.
You’ll also find utility locations, pavement grades for driveways, and construction notes defining how to achieve specified grades.

Types of Grading Plans

You may encounter several types depending on project scope: lot grading plan, subdivision grading plan, and combined grading/drainage plan.
A lot grading plan focuses on a single parcel’s finished elevations and drainage relationship to neighboring lots.

A subdivision or overall grading plan addresses multiple lots, roadways, and common-area drainage to ensure coordinated runoff management.
A combined grading/drainage plan separates topographic shaping from hydraulic details; the drainage plan adds inlets, invert elevations, and pipe profiles.
Know which type your municipality requires to avoid delays in permitting and inspections.

Process and Compliance for Residential Grading

You will need a clear site survey, an engineered grading design, and approvals from local authorities before construction or final landscaping. Each step documents elevations, drainage patterns, and compliance with municipal bylaws to prevent water damage to neighbouring properties.

Site Assessment and Surveying

You must start with a certified survey that shows property boundaries, existing contours, and the location of utilities and structures. Hire a registered land surveyor or professional engineer to produce elevations tied to a recognized datum so your grading ties into municipal storm systems correctly.

Inspect soil type, topsoil depth, and any signs of subsurface seepage or high groundwater. These factors determine allowable slopes and the need for subdrains or engineered fill. Record existing swales, low spots, and overland flow paths that could affect adjacent lots.

Document tree locations, retaining walls, driveways, and fences that affect grading. Provide spot elevations at corners, midpoints, and low points so the design addresses rear-to-front drainage, curb return grades, and lot-to-lot drainage transitions.

Design and Planning Procedures

Create a lot grading plan that shows proposed contours, finished floor elevations, high and low points, and flow arrows for surface drainage. Ensure minimum slopes meet local standards (for example, 1–2% away from the foundation) and show how runoff is directed to approved outlets.

Include details for rough grading, final topsoil placement, and any temporary erosion and sediment control measures during construction. Specify materials for engineered fill, compaction requirements, and how you will achieve surface tolerances relative to the approved plan.

Prepare a final grading certificate or as-built plan after completion, certified by a registered professional to confirm compliance with the approved design. Keep construction photographs, inspection logs, and compaction test results to support certification and to resolve any post-construction disputes.

Permitting and Regulatory Requirements

Check municipal lot grading bylaws and your local stormwater master plan for specific slope, setback, and outlet requirements. Many jurisdictions require submission of a grading plan with your building permit application and will not issue occupancy until a final lot grading certificate is accepted.

Understand the inspection schedule: rough grade inspection, pre-final before topsoil, and final inspection for certification. Address deficiencies noted by the inspector within the timeline specified to avoid stop-work orders or holdbacks.

You may need approvals from conservation authorities or regional stormwater agencies for outfalls, and you must obtain any required encroachment permits for work in municipal swales or easements. Keep copies of approvals and stamped plans on site for inspector review.